|
|
This item has been sold.
Good Wear Type A-1 Jacket
Price: $1,100.00 (new condition) — note shipping costs below
Fit: this pattern is very comfortable in the correct size
Leather: chrome-tanned aniline-finish russet sheepskin
Lining: robust cotton twill
Knits: mid-brown wool
Thread: mid-brown cotton
Buttons: horn big and smaller backing buttons
Size: 44
This jacket was made as a test of the new button holer we just received. This new machine is a modern example, and
is vastly superior to anything we've had before. Our two Reece machines weren't able to button hole some thinner, softer
leathers, including this very format of sheepskin. The new machine button holes all the leather we have, with almost
no adjustments. Also, the new machine will allow for holes close to seams, whereas the Reece machines would skip
stitches if close to a seam.
This jacket has superb button holes throughout, and it was a huge relief. The older machines would require an hour or more
of adjustment, and even then, some button holes wouldn't be ideal. This machine took all of two minutes to perform all the
button holes on this jacket. We often pine for the quality of older equipment, but in this case, older button holers suck, and
the new ones are superb.
This jacket has very grainy sheepskin (not the typical hide we use for A-1s) which will age well, and have a vintage look. The
leather is butter-soft, and has a lighter weight than horsehide. The lining is a heavy cotton twill, and the buttons are horn.
We believed that some originals were made with the sleeves having cut-edge triple-stitched seams, which we created before, but have since
realized that the original A-1, seen in "Suit Up! The Flight Jacket" has replaced sleeves. The sleeve/body joint is far messier than
anything that would be seen on a typical original. That jacket is a Gordon & Ferguson A-1, and sleeves would have a top stitched
seam matching the line of the back yoke.
The jacket would ideally fit someone in the range of 5'10" to 6'1" with a chest of 42-44", and a weight of about 185-205 pounds.
|
« Return |
Jacket dimensions:
Front length of body |
24" |
Front chest under arms |
23.5" |
Back width under arms |
23.5" |
Back height |
28" |
Shoulder width |
20" |
Sleeves, from shoulder to end of cuff |
26.75" |
Good Wear Type A-1 Jacket
Price: $1,100.00 (new condition) — note shipping costs below
Fit: this pattern is very comfortable in the correct size
Leather: chrome-tanned aniline-finish russet sheepskin
Lining: robust cotton twill
Knits: mid-brown wool
Thread: mid-brown cotton
Buttons: horn big and smaller backing buttons
Size: 44
Payment
Payment can be made either by credit card, check, or using PayPal.com, with our
moniker of info@goodwearleather.com. For credit cards, please email your intent to purchase the jacket, and we will email
a SecureNet form to fill out with your credit card information. Shipping costs in addition are $50.00 for customers within
the U.S.A, and $80.00 for customers outside of the U.S.A., using USPS EMS trackable shipping.
|
« Return |
|